Solar Address Mailbox Post, Column With Solar Backlit Address Sign, Solar Powered LED, Personalize Colors, Graphics and Sign Shapes
Solar Address Mailbox Post, Column With Solar Backlit Address Sign, Solar Powered LED, Personalize Colors, Graphics and Sign Shapes
BEAUTIFUL MAILBOX POST COLUMN AND MAILBOX WITH GRAPHIC AND ADDRESS ON EACH SIDE
1/8" Aluminum and pvc material with a baked on finish and pvc inner construction will lasts years and years without rust or corrosion.
The addresses are made using acrylic signs inset into each side of the post/column. The internal LED light illuminates the address signs beautifully. There are many sign shapes, and background colors to choose from.
Designed for long term outdoor use, your mailbox post should remain in place for years and years, maintenance free to help direct friends and family and deliveries as well as your mail directly to your door.
POST/COLUMN COLORS
White
Black
POST/COLUMN SIZE
42"h x 16.5"w x 6"d - The overall post column height is 42" tall and the mailbox sits at regulated rural mail delivery height.
POST/COLUMN INSTALLATION
Installation is straight-forward, simply mount over an existing treated wood 4x4 post (nominal 3.5" x 3.5") or install a new treated wood post (not included) in the ground. We include the screws to attach the column to the treated wood post.
MAILBOX
We offer a medium size plastic mailbox for your convenience. We do not make it. It is constructed from durable plastic and will not rust or dent. It is 35% larger than standard mailboxes. It is approved by the United States Postal Service. When you choose this option, all screws for mounting are included and mounting plate is sized perfectly for easy installation. Size of the mailbox is 7.6 in wide x 11.25 in high x 19.5 in deep - 1097 cubic inches. Available in White, Black and Dark Bronze.
ABOUT YOUR SOLAR ILLUMINATED MAILBOX POST
Your mailbox address post has a solar light and charging panel that lights the interior to illuminate the letters. Where you install the post matters - the sunlight should hit the solar panel and the post should cast a well defined shadow for 4-8 hours per day to receive the longest charge for the battery. Since the battery is depleted every night, no matter where you install the address post, there will be some days where there is not enough sunlight and the solar panel will not receive sufficient electricity to fully charge and therefore the post will light only for a short time and sometimes will not light at all. Most nights it will illuminate, we just want you to have a realistic expectation. Also, on those nights where it does not light, it still has high contrast so that the pizza driver will easily see your address. As with all solar gizmos you can currently buy, this is to be expected and does not indicate a failure of the solar light. In winter, the sun’s rays hit the earth at a shallow angle. These rays are more spread out, which minimizes the amount of energy that hits the solar cap, and then it will not last as long into the night as in spring, summer and early fall. Be sure to regularly clean the panel and remove dirt, snow, and ice from the solar panel.
Installation / Mounting
The Solar Address Sign Post will need to be installed where the cap receives sunlight throughout the day. If mounted in a shady location it will not work properly. The light may or may not stay on until the morning, but it should turn on automatically every evening once charged and last for a number of hours. If the length of time that the light stays on is diminishing it may be time to replace the battery (see solar cap section below).
With Mailbox - set mailbox on mounting board and fasten the 4 screws.
Without Mailbox - we have included two 1” PVC mounting boards - these may or may not work with your mailbox. If they work, they are designed to be mounted perpendicular to the mailbox support arm - you will need to cut them to length to fit within the mounting lip (on the bottom) of your mailbox and space them so they align with the mailboxes mounting holes - then screw them to the support arm and screw the mailbox to the mounting boards.
Let the cap charge in full sun for a complete day before expecting the sign to backlight. On cloudy days and in winter the solar panel will not generate as much electricity and the battery may not be charged to full capacity. On those days, the light may not last as long into the night and this is expected as with any solar device.
The solar light includes 2 rechargeable 3.7v NiMH batteries which will need to be replaced every so often. This is to be expected and is easy to do. See your instructions or contact us for help with this.
We craft these under license from U.S. Patent 8,631,998 B1.